FÄSSLER D 250 H5 Gear Honing Machine

workpiece diameter 250 mm
centre distance 0 mm
honing length max. mm
max. module 5

Bszvadi8
Gear Ø, min./max.10 / 250mm
Module range1 – 5
Length of teeth / max. table stroke500mm
Height of centres of tailstocks220mm

Max. weight of workpiece50 / 100kg
Honing head swivelling+/- 35°

Speeds of honing tool20 – 500rpm
Size of honing tool, Ø x width300 x 40mm

Workpiece speeds500 – 3,000rpm
Total adjustment of cross slide270mm
Rapid traverse of cross slide50mm
Infeed travel of cross slide, mechanical1 – 8mm/Ø
Roughing / finishing infeed1 – 29 / 0.2 – 2.8mm/sec

Table speeds, hydraulic0 – 6m/min

Total electrical load5.5 kW – 380 V – 50Hz
Weight3,200kg

Accessories / Special Features
*Working parameters can be preset using counters and control units. Automatic working process with workpiece counter.
*All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc.
*Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped).
*Separate honing oil unit with magnetic separator and fine filter.
*Mechanical tailstocks for manual loading. * Oil mist separator.
*Sliding doors with foot switch. * Separate hydraulic unit.

Condition : Good. Machine can be inspected under power.
Delivery : Ex stock, as inspected.
Payment : Net, after conclusion of contract.

We have a large selection of gear machines available. Please let us know your requirements.