Gleason NO 14 Straight Bevel Gear Generator

Capacity to Cut straight bevel gears and pinions up to 24″ Diameter, 3.5″ face-width.
Maximum cone distance (2.75″ 3.5″ face) 12″, Max. Cone distance (1″ face) 11.1/8″.
2u9vmm
Minimum Cone distance 0″. Max. pitch angle (angular gears) 105 degrees. Max. Pitch angle (90-deg shafts) 84 degrees/18min. Min. pitch angle 5 degrees/42min. Maximum Ratio 10/1. Maximum Face width 3.5″. Maximum Stroke length 0.5″ 4.5″. Index range, Inclusive 5-100 (+up to 200). Maximum pitch, nominal 3 DP (8.5 module), Diameter of hole in work spindle (large end) 3.906″, Spindle taper per foot 0.609″. Depth of spindle taper 6″. Diameter of spindle thru-hole 3.063″. Spindle nose to centre line 2.5” to 15″, 13 x tool speeds in strokes per Min. 64 to 495. 16 x feeds from 10 seconds to 2 minutes, 11 seconds per tooth. Machine Serial No. S/N 24268. Machine complete with Setting Gauges, Change Gears, Large selection of Cutters and Cutter Holders.